Windows 98 Installation
1. Select “Add New Hardware” from the Control Panel. Press the
“Next>” button.
2. Click “Next>” again.
3. The system will now search for the hardware.
4. Click on “No, the device isn’t in the list.” Click the “Next>”
button.
5. Click the “No” because you do not want the system to search
for the hardware.
6. Scroll down in the box and select “Sound, Video and game
Controllers.” Click on “Next>.”
7. Click on “Have Disk....”
8. Insert the Portman PC/S Drivers and Diagnostics disk in Drive
A:\ and click on “OK.”
9. Click on “OK” to the Portman PC/S.
10. Click on “Finish.”
11. The driver defaults to “None.” Click on the arrow to select the
available COM port. Click on “OK” and re-start Windows for
the changes to take effect.
Updating the Driver in Windows 3.xx
If you are using Windows 3.x and you already have an older
Portman Windows 3 driver installed in your system, you will need
to remove it before updating to the newest Portman driver. Follow
these steps to remove an older driver from your system:
1. Start Windows as you usually do.
2. Open the Windows Control Panel application (usually in your
Main program group).
3. Start the Drivers applet.
4. Check for a “Midiman Portman PC/S” entry. If none exists,
then the driver is not installed - discontinue this procedure and
follow the above FIRST-TIME WINDOWS DRIVER INSTALLA-
TION instead. If the entry exists, then highlight it and select
Remove.
5. In order for Windows to completely remove the new driver,
you need to exit and restart Windows.
8
