M-Audio Oxygen Pro Series, Руководство пользователя

Страница: 92 / 114

92
Encoder Turn
To edit the turn functionality of the Encoder when in DAW Edit Mode, press and hold the
SHIFT button and move the ENCODER . You can scroll through the available parameter values
using the Encoder. Select what parameter you would like to edit by pressing the Encoder.
Channel: The Encoder will send its messages over this channel. Select the global channel
( Global ), or a specific channel ( Channel 1 – 16 ).
Available Values: Global, 1-16
Message:
•
Mode: This will specify what message will be sent when the Encoder is turned.
o
CC Relative: This is useful to send standard MIDI CC messages to your DAW.
o
CC Cycle: This useful for controlling from 2 - 4 CC values, as seen on a button or VI
control with 2-4 parameters. Select from 2-4 values.
o
CC Inc/Dec: This is useful for scrolling through several CC values.
o
Program Cycle: This is useful for selecting between different presets in software or
external MIDI hardware. Select from 2-4 program messages.
o
Program INC/DEC: This is useful to scroll through multiple program messages.
o
Mackie Up/Down: This is useful to scroll up/down in a DAW that responds to
Mackie Control Mode.
o
Mackie Left/Right: This is useful to scroll left/right in a DAW that responds to
Mackie Control Mode.
o
HUI Up/Down: This is useful to scroll up/down in a DAW that responds to HUI
mode.
o
HUI Left/Right: This is useful to scroll left/right in a DAW that responds to HUI
mode.
•
CC Relative Type: The Encoder will send a value number in the range of values when
you turn it left or right.
o
Right 65, Left 63
o
Right 63, Left 65
o
Right 127, Left 01
o
Right 01, Left 127
•
CC Cycle Mode Type: The Encoder will send from 2 to 4 values when turned.
•
CC Cycle Value: Specifies what CC value will be sent.
•
CC: Selects the MIDI CC value that will be sent when the Encoder is turned.
•
Program Cycle Mode Type: The Encoder will send from 2 to 4 values when turned.
•
Program: Specifies what Program will be sent.