87
Fader Buttons
To edit one of the Fader Buttons when in DAW Edit Mode, press a fader button. After you’ve
selected which button you would like to edit you will need to select what button you are
editing per Mode. This enables you to have 4 different button messages for 1 button
depending on the MODE – Rec, Select, Solo and Mute. For example, fader button 1 can send
a CC message on channel 1 when MODE is set to Record, and then when the MODE is set to
Select fader button 1 can send a CC message on channel 2. You can scroll through the
available parameter values using the Encoder. Select what parameter you would like to edit by
pressing the Encoder.
Mode “MODE”:
•
Record
“RECORD”:
The fader button’s message when the MODE is set to RECORD.
•
Select
“SELECT”:
The fader button’s message when the MODE is set to SELECT.
•
Mute
“MUTE”:
The fader button’s message when the MODE is set to MUTE.
•
Solo
“SOLO”:
The fader button’s message when the MODE is set to SOLO.
Channel:
The fader button will send its messages over this channel. Select the global channel
(
Global
), or a specific channel (
Channel 1
–
16
).
Available Values:
Global, 1-16
Message “MESSAGE”:
•
Mackie/HUI
“MACK/HUI”:
When set to
Mackie/HUI
, you can use the button
with a DAW
that responds to HUI mode’s Rec, Select, Mute, and Solo controls.
•
Mackie
“MACKIE”:
When set to Mackie Control, you can use the Encoder with a DAW
that responds to Mackie Control mode’s Rec, Select, Mute, and Solo controls.
•
Program
“PROGRAM”:
The fader button will send this program number when you press
it.
•
Program Cycle
“PRG CYCL”:
The fader button will send the value with this Program
number when you press it, one at a time, cycling through them with each press.
•
Program Inc/Dec
“PG IN/DC”:
The fader button will send the next (Increment) or previous
(Decrement) program number in the range of programs when you press it.
•
CC
“CC”:
The fader button will send its MIDI messages using this CC number.
•
CC Cycle
“CC CYCLE”:
The fader button will send the value with this CC number when
you press it, one at a time, cycling through them with each press.
•
CC Inc/Dec
“CC INC/DC”:
The fader button will send the next (Increment) or previous
(Decrement) value number in the range of values when you press it.
•
Note
“NOTE”:
The fader button will send its MIDI messages using this Note number.
When set to Program, these are the available parameters:
Program:
The fader button will send this program number when you press it.
Available Values:
0-127
MSB:
The fader button will send this Bank MSB (Most Significant Byte) number when you
press it.
Available Values:
0-127
Содержание Oxygen Pro Series
Страница 1: ...User Guide English 2 102 Appendix English 103 109 ...
Страница 114: ...m audio com Manual Version 1 1 ...
