|
14
KeyRIg 49 User Guide
The Volume Slider
As with the Modulation wheel, the Volume slider can also be assigned to any of the 132 controllers (0-131) shown at the back of this
manual
To assign the Volume slider to a certain MIDI parameter:
1. Press the Edit Mode button.
2. Press the black key above D4 (D#4), representing “SLIDER ASSIGN.”
3. Use the Numerical Data Entry keys G3 – B4 to enter the number of the controller value you want to assign to the
Volume slider.
4. Press the ENTER key (C5).
If you make an error while entering the numerical data value, you can press the CANCEL key (C1) to exit Edit mode without
changing the MIDI CC assigned to the Volume slider.
PLEASE NOTE:
Each time the keyboard is turned off, optional MIDI parameters assigned to
the Volume slider or Modulation wheel will be lost. Each time the keyboard is powered up, the
Volume slider will default to being assigned to Volume (MIDI CC 07), and the Modulation wheel
will default to being assigned to modulation (MIDI CC 01).
