background image

Confidential 

M-Audio Service Manual 

 

Warnings 

 

TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS 
PRODUCT TO WATER OR MOISTURE. 

 

The arrowhead symbol on a lightning flash inside a triangle is intended 
to alert the user to the presence of uninsulated “dangerous voltage” 
within the enclosed product which may be of sufficient magnitude to 
constitute a risk of electric shock to persons. 

 

The exclamation point inside a triangle is intended to alert the user to 
the presence of important operating, maintenance and servicing 
instructions in the literature which accompanies the product. 

 

REPAIR BY ANY PERSON OR ENTITY OTHER THAN AN AUTHORIZED M-AUDIO 
SERVICE CENTER WILL VOID THE M-AUDIO WARRANTY. 

 

PROVISION OF THIS MANUAL DOES NOT AUTHORIZE THE RECIPIENT TO 
COMPETE WITH ANY M-AUDIO DISTRIBUTOR OR AUTHORIZED REPAIR SERVICE 
CENTER IN THE PROVISION OF REPAIR SERVICES OR TO BE OR MAKE REPAIRS 
AS AN AUTHORIZED SERVICE CENTER. 

 

ALL REPAIRS DONE BY ANY ENTITY OTHER THAN AN AUTHORIZED M-AUDIO 
SERVICE CENTER SHALL BE SOLELY THE RESPONSIBILITY OF THAT ENTITY, 
AND M-AUDIO SHALL HAVE NO LIABILITY TO THAT ENTITY OR TO ANY OTHER 
PARTY FOR ANY REPAIRS BY THAT ENTITY. 

 

Regarding the Power Supply Fuse 

Caution: 

The product under service may employ the use of a 

replaceable fuse. Danger of fire or electrocution if fuse is incorrectly 
replaced. Replace with only the same type or equivalent type 
recommended by the equipment manufacturer.

  

 

Regarding the Internal Battery 

Caution: 

The product under service may employ the use of a internal 

battery. Danger of explosion if battery is incorrectly replaced. Replace 
only with the same or equivalent type recommended by the 
manufacturer. Dispose of used batteries according to the manufacturer’s 
instruction.

 

 

Содержание Hammer 88 Pro













































Отзывы: