background image

Confidential 

M-Audio Service Manual 

 

Preface 

 

This document is intended to assist the service technician in the operation, maintenance and 
repair of the M-Audio device. Together with the User Reference Manual, this document provides 
a complete description of the functionality and serviceability of the Device. Any comments or 
suggestions you may have pertaining to the document are welcome and encouraged. 

 

Read This! 

 

In addition to any purchase price that M-Audio may charge as consideration for M-Audio 
selling or otherwise transferring this service manual (“Manual”) to you, if you are not a 
service and repair facility (“Service Center”) authorized by M-Audio in writing to be an 
authorized Service Center, M-Audio sells or transfers the Manual to you on the following 
terms and conditions: 

 

Only Service Centers authorized by M-Audio in writing are authorized to perform service 
and repairs covered by an M-Audio warranty (if any), and transfer of the Manual to you 
does not authorize you to be an authorized Service Center. 

Therefore, if you perform, or if 

the Manual is used to perform, any service or repairs on any M-Audio product or part 
thereof, any and all warranties of M-Audio as to that product and any service contract 
with M-Audio for that product shall be voided and shall no longer apply for such product, 
even if your services or repairs were done in accordance with the Manual.

 

 

All service or repairs done by you or with reference to the Manual shall be solely your 
responsibility, and M-Audio shall have no liability for any such repairs or service work. 

All 

such service or repairs are performed at the sole risk of the person performing the service 
or repairs.

 You agree that all such work will be performed in a competent, professional and 

safe manner at all times and to indemnify and fully hold M-Audio and its successors and 
assigns harmless in the event of any failure to so perform. 

 

Your purchase of the Manual shall be for your own ultimate use and shall not be for 
purposes of resale or other transfer. 

 

As the owner of the copyright to the Manual, M-Audio does not give you the right to copy 
the Manual, and you agree not to copy the Manual without the written authorization of M-
Audio. M-Audio has no obligation to provide to you any correction of, or supplement to, the 
Manual, or any new or superseding version thereof. 

 

M-Audio shall have the right to refuse to sell or otherwise transfer repair parts or materials 
to you in its sole discretion. You shall not use, sell or otherwise transfer spare or 
replacement parts supplied by M-Audio to you (i) to repair or be used in products 
manufactured for or by third parties or (ii) to any third parties for any purpose. 

 

You shall not make any warranties or guarantees with respect to the products of M-Audio 
or the use thereof on behalf of M-Audio or in your own name. 

 

The foregoing describes the entire understanding related to sale or transfer of the Manual 
to you, and no other terms shall apply unless in a writing signed by an authorized 
representative of M-Audio. 

 

All Trademarks are property of their respective companies. 

Содержание Hammer 88 Pro













































Отзывы: