Note that the microphone can be connected either through the SDR-1000 enclosure (Mic to 4-pin connector
on the front and the 1/8" stereo connector in the back going to the sound card Mic In) as shown
-OR-
it can be
wired straight to the Delta 44 Input 3.
A 1/8" stereo coupler (included in the cable set) will be necessary to connect the speakers to Outputs 1/2
unless the speakers have a female 1/8" receptacle for the input. The same is true for connecting a PC
microphone rather than using the front panel connector. When using the Delta 44, the plug marked "SPKR"
on the back of the enclosure is not used.
For digital mode support see the VAC Setup and Use document on our Download page.
Here is a functional description of each input and output from the Delta 44 break out box:
Out 1 & 2:
-10dBV nominal stereo speaker/headphone output. This will normally be connected directly to
Cabling Diagram
