background image

Your BX

8

Warranty

M-AUDIO warrants that this product is free of defects in materials and
workmanship under normal use for a period of One (1) year from purchase
date, so long as the product is: owned by the original purchaser; the original
purchaser has proof of purchase from an authorized M-AUDIO dealer; and the
purchaser has registered his/her ownership of the product by sending in the
completed warranty card.

This warranty explicitly excludes any included external non-integrated power
supplies and cables which may become defective as a result of normal wear and tear.

In the event that M-AUDIO receives written notice of defects in materials or
workmanship from such an original purchaser, M-AUDIO will either replace the
product, repair the product, or refund the purchase price at its option. In the
event any repair is required, shipment to and from M-AUDIO and a nominal
handling charge shall be born by the purchaser. In the event that repair is
required, a Return Authorization number must be obtained from M-AUDIO.
After this number is obtained, the unit should be shipped back to M-AUDIO in
a protective package with a description of the problem and the Return
Authorization clearly written on the package.

In the event that M-AUDIO determines that the product requires repair
because of user misuse or regular wear, it will assess a fair repair or replacement
fee. The customer will have the option to pay this fee and have the unit repaired
and returned, or not pay this fee and have the unit returned unrepaired.

The remedy for breach of this limited warranty shall not include any other
damages. M-AUDIO will not be liable for consequential, special, indirect, or
similar damages or claims including loss of profit or any other commercial
damage, even if its agents have been advised of the possibility of such damages,
and in no event will M-AUDIO's liability for any damages to the purchaser or
any other person exceed the price paid for the product, regardless of any form
of the claim. M-AUDIO specifically disclaims all other warranties, expressed or
implied. Specifically, M-AUDIO makes no warranty that the product is fit for any
particular purpose.

This warranty shall be construed, interpreted, and governed by the laws of the
state of California. If any provision of this warranty is found void, invalid or
unenforceable, it will not affect the validity of the balance of the warranty, which
shall remain valid and enforceable according to its terms. In the event any
remedy hereunder is determined to have failed of its essential purpose, all
limitations of liability and exclusion of damages set forth herein shall remain in
full force and effect.

15

Содержание BX8-050103
















Отзывы: