6
12.
Power Sources (if applicable): This product should be connected to a power supply only of the type described in these
operating instructions, or as marked on the unit.
13.
Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and
re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.
14.
Water and Moisture (if applicable): This product should be kept away from direct contact with liquids. The apparatus shall not
be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
15.
Caution
(if applicable):
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type. Batteries (a battery pack or an installed battery) shall not be exposes to excessive heat such as sunshine, fire, etc.
16.
(If applicable) Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
17.
Protective earthing terminal (if applicable): The apparatus should be connected to a mains socket outlet with a
protective earthing connection.
•
Denmark (
Danmark
): Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.
•
Finland (
Suomi
): Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
•
Norway (
Norge
): Apparatet må tilkoples jordet stikkontakt.
•
Sweden (
Sverige
): Apparaten skall anslutas till jordat uttag.
18.
For Class II apparatus only
: This symbol means the equipment is a Class II or double-insulated electrical appliance.
It has been designed in such a way that it does not require a safety connection to electrical earth.
19.
Class II Wiring
(if applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with
“Class II Wiring” requires Class II wiring installed by an instructed person or the use of ready-made leads or cords.
20.
Warning
(if applicable): Provide an earthing connection before the mains plug is connected to the mains. When
disconnecting the earthing connection, be sure to disconnect it after pulling the mains plug out from the mains.
21.
This apparatus is for professional use only. Intended operational climate: moderate.
22.
(If applicable) When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful
not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord
has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by
the manufacturer.
23.
Warning
(if applicable): To prevent possible hearing damage, do not listen at high volume levels for long periods.
24.
Warning
(if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the
exterior bottom enclosure or rear panel before installing or operating the product.
25.
Warning
(if applicable): Terminals marked with the lightning bolt symbol may be of sufficient magnitude to constitute
a risk of electric shock.
Service Instructions
•
Disconnect power cord before servicing.
•
Replace critical components
only with factory parts or recommended equivalents.
•
For AC line powered units: Before returning repaired unit to user, use an ohmmeter to measure from both AC plug blades
to all exposed metal parts. The resistance should be more than 2,000,000 ohms.
Safety Notices
CAUTION
: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
ANY COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
DANGEROUS VOLTAGE
: The lightning flash with arrowhead symbol within the equilateral triangle is intended to
alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
INSTRUCTIONS
: The exclamation point within the equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.
WARNING
: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment
should NEVER be kept or stored in damp environments.
CAUTION
(
for U.S.A. & CANADIAN models only
):
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG
WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
NOTICE CONCERNING LASER PRODUCTS
:
DANGER
: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK
FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. USE OF CONTROLS OR ADJUSTMENTS OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
NOTICE CONCERNING FCC REGULATIONS
:
You are cautioned that changes or modifications not expressly approved by
the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures: (
a
) reorient or relocate the receiving antenna; (
b
) move this unit; (
c
) increase the separation between the equipment
and receiver; (
d
) connect the equipment into an outlet on a circuit different from that to which the receiver is connected; (
e
) be
sure that all cables are properly shielded, using a choke or ferrite where appropriate; or (
f
) consult the dealer or an
experienced radio/television technician for help.
Содержание BX4BT
Страница 28: ...m audio com Manual Version 1 0 ...
