M-Audio Axiom Pro, Руководство пользователя

Страница: 22 / 23

|
20
HyperControl for Pro Tools
|
Axiom Pro
Changing HyperControl assignments (Pro Tools 8 only)
Users of Pro Tools 8 0 (and higher) can change HyperControl assignments by using the “Learn” button at the top of each plug-in
or virtual instrument window To do this:
1 Click the “Learn” button
2 Click on an on-screen control within the plug-in or virtual instrument window
3 Move one of the hardware controls (buttons, knobs, sliders, etc ) of Axiom Pro This will assign your selected on-screen
control to the chosen hardware control of Axiom Pro
Repeat steps 2-3 for any other controls you wish to re-assign
4 When you are finished, click the “Learn” button of your plug-in or virtual instrument again to exit Learn Mode
✓
NOTE: Once a knob is assigned to a new on-screen control, the original assignment of the knob is “forgotten.” For
example, if an Axiom Pro encoder knob is assigned to control volume, but you re-assign the knob to control panning,
the knob will no longer control volume.
© 2008 Avid Technology, Inc. All rights reserved. Product features, specifications, system requirements and availability are subject
to change without notice. Avid, M-Audio, Axiom Pro, HyperControl and Pro Tools are either trademarks or registered trademarks of
Avid Technology, Inc. All other trademarks contained herein are the property of their respective owners.