M/A-Com P5100 Series, Инструкция по установке и эксплуатации, Страница: 6 / 22

5
exposure and provide simple procedures on how to control it. Please refer to
the following websites for more information on what RF energy exposure is
and how to control your exposure to assure compliance with established RF
exposure limits.
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
http://www.osha.gov./SLTC/radiofrequencyradiation/index.html
1.1.1 Federal Communications Commission
Regulations
Your M/A-COM, Inc. EDACS D3100 RF Modem is designed and tested to
comply with the FCC RF energy exposure limits for mobile two-way radios
before it can be marketed in the United States. When two-way radios are
used as a consequence of employment, the FCC requires users to be fully
aware of and able to control their exposure to meet occupational
requirements. Exposure awareness can be facilitated by the use of a label
directing users to specific user awareness information. Your M/A-COM, Inc.
EDACS D3100 RF Modem has an RF exposure product label. Also, your
D3100 Installation and Operator’s Manual includes information and operating
instructions required to control your RF exposure and to satisfy compliance
requirements.
1.2 COMPLIANCE WITH RF EXPOSURE
STANDARDS
Your M/A-COM, Inc. EDACS D3100 RF Modem is designed and tested to
comply with a number of national and international standards and guidelines
(listed below) regarding human exposure to RF electromagnetic energy. This
radio complies with the IEEE and ICNIRP exposure limits for
occupational/controlled RF exposure environment at duty factors of up to
60% talk-40% listen and is authorized by the FCC for occupational use. In
terms of measuring RF energy for compliance with the FCC exposure
guidelines, your radio antenna radiates measurable RF energy only while it is
transmitting (talking), not when it is receiving (listening) or in standby mode.
Your M/A-COM, Inc. EDACS D3100 RF Modem complies with the
following RF energy exposure standards and guidelines:
•
United States Federal Communications Commission (FCC), Code of
Federal Regulations; 47 CFR §§ 2 sub-part J.
•
American National Standards Institute (ANSI)/Institute of Electrical
and Electronic Engineers (IEEE) C95.1-1992.
•
Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999.