M/A-Com Orion, Руководство по установке

Страница: 64 / 80

64
Master Radio Programming
Decide which radio unit shall be the Master Unit. For shop programming, setup
the Master radio unit for programming as described in the Service Manual or in
the ProGrammer On-Line Help. For field programming, setup the Master radio
unit for programming as shown in Figure 49.
THE SLAVE RADIO MUST
BE DISCONNECTED . Program the Master radio and control unit with the
control configurations shown in Table 1.
Slave Radio Programming
Decide which radio unit shall be the Slave radio unit. For shop programming,
setup the Slave radio unit for programming as described in the Service Manual or
in the ProGrammer On-Line Help. For field programming, setup the Slaver radio
unit for programming as shown in Figure 50.
THE MASTER RADIO
MUST BE DISCONNECTED . Program the Slave radio unit with the control
configurations shown in Table 1.
Table 1 – Dual Radio Control Configuration Programming
NETWORK OPTIONS
Dual Control Disable
Speaker Disable
Multiple Radio Enable
Radio type Slave or Master
Power Up Volume 5
Mute Time Out 30.0
Termination Enable
Display Selected for Master radio only
Power Up Enable for Master radio only
Power Up Radio Enable for Master radio only
Receive Emergency Enable for Master radio only
Receive Only Enable for Master radio only
MuRPS Disable for Master radio only
PROGRAM RADIO SETUP
Mobile Options Push Button
ORION OPTIONS
Write Orion System Keypad File Enable (System control unit)
Write Scan Keypad File Enable (Scan control unit)