Warranty
All SC-‐1000 are warranted against defects in material and/or factory workmanship for a period of one year from the date
of purchase. Standard repairs due to misuse or wear and tear, as well as replacement parts including but not limited to
batteries, padding, USB cable, etc. are excluded. Shipping is to Eartec at customer’s expense, Eartec will pay for return
ground shipping if the product warranty applies to the repair.
Shipping
Prior to returning your headset for warranty or service you must call Eartec for an RA (Return Authorization)
number: 1 (401) 782-‐4966
www.eartec.com
1.800.399.5994
Model SC 1000 Plus
Professional Two-‐Way Radio
The
Scrambler UHF
General Service
All repair work will be performed for the cost of replacement parts and return shipping
from the Eartec factory.
Service
Eartec Co Inc
145 Dean Knauss Dr
Narragansett RI 02882
Safety
Important Information for Safe and Efficient Operation. Please read this information before using your radio.
Safety and General
1. Do not transmit more than 50% of time. It is important as the radio generates measurable RF energy exposure only when transmitting.
2. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
3. Radio frequency signals transmitted may cause interference to hearing aids.
4. Turn off the radio when near medical equipment.
5. This product should not be used by people with pacemakers.
6. Do not use the radio when driving a vehicle or operating machinery.
7. Do not use the radio when on board aircraft.
8. Do not hold the antenna when transmitting.
9. Do not use the radio when the antenna has damaged.
10. Turn off the radio and remove the batteries if you are not going to use it for a long time.
Two-‐way Radio Operation
The device was tested for typical body-‐worn operations using the supplied belt-‐clip. To maintain compliance with FCC RF exposure
requirements, body-‐worn operations are restricted to the supplied belt-‐clip. For hand-‐held operation, the radio should be held at least 1
inch (2.5cm) from the user’s face. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure
requirements and should be avoided. For more information about RF exposure, please visit the FCC web site at www.fcc.gov.
OPERATIONAL CAUTIONS
1. Never dispose of batteries in a fire. There is a serious risk of explosion and /or the release of highly toxic chemicals.
2. Do not expose your product to direct sunlight, extreme cold or place it near heating appliances.
3. Do not submerge any part of your product in water and do not use it in damp, humid or wet conditions.
4. Do not expose your product to fire, explosive or other hazardous conditions. For example, at petrol stations or areas where explosive
products are used.
FCC Statements FCC ID: B4HSC1000
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Each Scrambler Plus is factory programmed to provide discreet private two-‐way voice
contact. All outgoing transmissions are digitally encrypted and scrambled to prevent
eavesdropping. In addition, CTCSS frequency guard protects the receive circuit by
blocking outside interference. Combined, these features ensure that communications
remain completely private.
