Page 21 of 44
©2018 Lytx, Inc. - Confidential & Proprietary.
6. Crimp style connectors: All crimp style connectors must be the sealing type. Verify the
crimped connection is secure. Then heat up the connector to melt and seal it.
7. Fuse taps/Add-A-Circuits: If using a fuse tap (Add-A-Circuit), make sure to test with a
meter that the circuits only share the hot leg of the fuse receptacle to ensure the
circuits are separately fused. If installed backwards, a fuse tap will compromise the
original circuit. Below is one example:
Refer to the "Fuse Taps/Add-A-Circuits Suggestions" section below for more inform-
ation.
8. Quick slide/spade connectors: Quick slide/spade connectors may be used only if they
are either properly insulated OR they are sealed with heat shrink. Otherwise, these
may not be used.
