Page 16 of 44
©2018 Lytx, Inc. - Confidential & Proprietary.
Prepare the Mounting Location
CAUTION: Steps 1 and 2, cleaning the area with the alcohol wipe and drying it, are crit-
ical to prevent the bracket from falling off later.
CAUTION: Do not peel the backing from the adhesive strips on the bracket in this
section.
1. Clean the mounting area on the windshield thoroughly with the alcohol wipe, removing
any debris and moisture. This should be the area behind the rear view mirror on the
passenger side or the equivalent area if there is no rear view mirror (see below).
2. Dry the mounting area thoroughly with a clean, dry cloth.
3. Following the mounting location guidelines above, hold the assembly in place and
trace the outline of the bracket on the windshield with a marker. Make sure the traced
guide marks are level.
4. Remove the Window Unit from the mounting bracket.
5. Check the fit of the bracket against the windshield. If the windshield is curved, you may
gently bend the bracket so it will lie flush against the glass.
6. Check again to make sure you’ve selected the best mounting location.
a. Sit in the driver’s seat while holding the device up. Make sure it doesn’t block the
driver’s view of the road.
b. Turn on the wipers and rotate mirrors, sun visors, and other objects near the
device to make sure they cannot block either lens.
