Lytro Illum, Руководство пользователя

Страница: 21 / 46

Swipe the shutter speed selection band to increase or lower the speed.
Once the selection has been made, tap the screen anywhere outside of the
selection band to close the band. A half press of the shutter button will also close
the selection band. A full press will close it and take a picture.
Set the shutter speed using the front dial while in Shutter Priority Mode or Manual
Mode*. As the dial is rotated, the shutter speed indicator in the Information Bar at
the bottom of the screen will change to display the current setting.
*
Note that the functions assigned to the front and rear dials in the various exposure modes can
be changed (see Settings, page XX ). The default assignments are referenced here.
Setting the EV compensation
Exposure value compensation is available in all exposure modes except Manual
Mode. Set the EV compensation by tapping the EV compensation indicator in the
information bar at the bottom of the screen. A selection band will open across the
middle of the screen, with the current setting at the center. The available settings
range from -2.0 to +2.0.
Swipe the band from right to left to increase the compensation, or from left to
right to lower it. Tap on any value visible in the selection band to go directly to
that setting. Double-tap on the selection band to return to the initial compensation
setting.
Once the selection has been made, tap the screen anywhere outside of the
selection band to close the band. A half press of the shutter button will also close
the selection band. A full press will close it and take a picture.