LYSON W204100A, Руководство пользователя

Страница: 3 / 22

There is a temperature controller HC- 01 mounted in the devices
Heating Controller
c
4 5 6
3
1 2
Setting up the controller
1. Prior to plugging in the device to the mains, one must make sure that the controller is switched off.
2.
Switch (0/1) on the control panel shall be in “0” position
3. Once plugged in to the mains, Sw
itch (0/1) shall be moved from “0” position to “1” position
4. Controller should be programmed in line with individual needs
5.
In order to enter the programming mode (Prog), buttons “+” and “-“ must be pressed at the same time
during controller start-up.
Starting work with a controller
1 – signalling the work state
Indicator lights up
– temperature regulator switched on, indicator dimmed – temperature regulator switched
off (controller operates as an ordinary thermometer), indicator flashes
– temperature regulator switched on
and initial heating in progress
2
– signalling the activation of heating transmitter
Indicator lights up
– transmitter contacts closed (heating on), indicator dimmed – contacts opened (heating
off)
3
– display
Working mode
– default mode, selected after controller power supply switched on. The display shows the
measured temperature, readings specified in
o
C.
Setting mode
– selected when button “+” or “-“ has been pressed. The display shows the preset
temperature. Readings specified in
o
C. Reading flashes and returns to measured temperature after a while.
Working time setting mode (Pro.)
– activated when “ON/OFF” button is pressed and held. The display
shows working time, counting it from activation, after which the thermostat gets switched off. Readings
specified in hours.
Display brightness setting mode (d.br.)
– activated when “ON/OFF” button is pressed and held for a
longer time. The display shows the currently set brightness on all its segments . When the setting limit values
are reached, the segments start to flash.