6. Maintenance and cleaning of the honey
extractors
IMPORTANT!
Prior to starting the maintenance, the plug must be
taken out!
ATTENTION!!!
Device cover to be washed with soapy water at room
temperature 25
IMPORTANT!!!
Do not use any detergents with alcohol (causes cracking
in plexi glass)
Prior to first extraction, honey extractor shall be washed
thoroughly with hot water containing slight quantities of
agents accepted to be used in devices intended to come
into contact with food or by means of a pressure washer. Be
careful during the washing and prevent dumping the honey
extractor engine or controller ( they may be covered with
water-resistant materials)
While washing, the bearings placed under the drum cannot
be flooded. Therefore, the orifice through which the basket
axis goes must be covered inside the drum.
After washing, the honey extractor must be rinsed with pure
water and dried.
6.1. Dismantling the basket in manual diagonal honey
extractors.
•
Unscrew the upper beam together with the drive
and the lids
•
take the basket out
•
clean the honey extractor
•
Put the basket into the drum
•
Assemble the beam together with the drive and lids
6.2. Dismantling the basket in radial and diagonal
honey extractors with electric as well as combined
manual and electric drives
•
Unscrew the engine cover
•
Remove the V-belt
•
Unscrew a bolt on the pulley
•
Unscrew the upper beam together with the lids
•
take the basket out
•
clean the honey extractor
•
Put the basket into the drum
•
Assemble the beam together with the lids
•
Screw on the pulley and assemble the V-belt
•
Screw on the cover
7. Recycling
Worn-out product must be removed as waste only within
selective waste collection organised by the Network of
Communal Electric and Electronic Waste Collecting Points.
A customer is entitled to return the used equipment to the
electrical equipment distributor network, at least free of
charge and directly, if the device to be returned is of proper
type and serves the same purpose as the newly purchased
device
8. Guarantee
Product purchased from “Łysoń’ company are
encompassed by the manufacturer’s guarantee.
The guarantee duration equals 5 years *.
The guarantee period does not include the controlling
elements and electric drive and fittings. Such ones are
encompassed by a two-year guarantee.
A receipt or a VAT invoice is issued for each product
purchased.
* details on the guarantee are available in the
regulations on the website www.lyson.com.p