2
Trademarks
Niagara, Niagara AX is a registered trademark of Tridium, Inc.
LON, LonWorks and LonTalk are registered trademarks of Echelon Corporation
BACnet is a registered trademark of ASHRAE
Disclaimers
NO WARRANTY. Lynxspring, Inc. (herein after referred to as “Lynxspring”) makes no warranty as to the
accuracy of or use of this technical documentation. Any use of the technical documentation or the information
contained therein is solely at the risk of the user.
Documentation may include technical or other inaccuracies or typographical errors. Lynxspring reserves the right
to make changes to this document without prior notice, and the reader should in all cases consult Lynxspring to
determine whether any such changes have been made. The information in this publication does not represent a
commitment on the part of Lynxspring.
Lynxspring shall not be liable for incidental or consequential damages resulting from the furnishing, performance,
or use of this material.
This guide contains links and references to third-party websites that are not under the control of Lynxspring, and
Lynxspring is not responsible for the content of any reference material or linked websites. If you access a third
party website mentioned in this guide, then you do so at your own risk. Lynxspring provides these links only as a
convenience, and the inclusion of the link does not imply that Lynxspring endorses or accepts any responsibility
for the content on those third-party sites.
Electronic controls are static sensitive devices. Discharge yourself properly before manipulation and installing
the Lynxspring wireless gateway.
All Lynxspring wireless gateways and related wireless thermostats are to be used only as operating controls.
Whenever a control failure could lead to personal injury and/or loss of property, it becomes the responsibility of
the user to add safety devices and/or alarm system to protect against such catastrophic failures.
All VT7000 series wireless thermostats and associated components have been rigorously tested to ensure
reliable operation in most building applications using the latest 2.4 ZigBee technologies. Lynxspring cannot
guarantee against potential network interference should additional wireless systems be deployed sharing close
proximity.
Best practices covered in this manual and all related Lynxspring documents should be considered as a guide to
apply Lynxspring Wireless Network devices only. The instructions included in this manual are based upon
Lynxspring in house testing and should be referred to as a guide only.
Lynxspring Inc. may not be held liable for continued reliable, or robust operation of any and all wireless based
devices. Although Lynxspring has taken many precautions in assuring the robustness of the VT7000 series
wireless thermostat product line and associated network access point (JENE’s with wireless option card) Please
note; future application of additional wireless devices utilizing the same or similar channels and / or frequencies
may degrade performance of overall system and / or reliability.
Non-approved modifications or changes made to the communication card, the wireless thermostat driver or
wireless thermostats may void the FCC compliance of the wireless card and wireless thermostats.
Ferrites supplied with the power supply and VWG MUST be installed according to instructions. Failure to do so
may void the FCC compliance of the wireless card and wireless thermostats.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.