Lynx RAVE RS SERIES, Руководство оператора

Страница: 15 / 113

RIDING THE VEHICLE
After Engine is Started
For proper engine starting procedure,
refer to the
ENGINE STARTING PRO-
CEDURE
section.
1. Check headlights high beam and
low beam, taillight, stop light and
pilot lamps operation.
NOTE:
You may need to detach tether
cord from your clothes to check lights.
In such a case, attach cord as soon
as you get back at the controls of the
snowmobile.
2. Check the engine cut-off switch (by
pulling tether cord cap) and emer-
gency engine stop switch opera-
tion.
3. Release parking brake.
4. Refer to the
VEHICLE WARM UP
section and follow instructions.
Pre-Ride Check List
ITEM OPERATION
✔
Body including seat, footrests,
lights, controls and instruments Check condition and remove snow or ice.
Air silencer prefilter
Check condition and remove snow or ice.
Steering system Check for free movement and proper action.
Skis and runners Check condition.
Fuel
Check level and replenish if necessary.
Coolant
Check level. If low, contact an authorized Lynx
dealer.
Brake fluid
Check level. A low fluid level indicates a leak or
worn brake pads. Contact an authorized Lynx
dealer.
Storage compartment
Check for proper latching and no heavy or
breakable objects.
Throttle lever Check for proper action.
Track Check condition and remove snow or ice.
Rear suspension slider shoes
Check condition.
Brake lever Check for proper operation.
Parking device Check for proper operation.
Emergency engine stop switch
and engine cut-off switch
Check for proper action. Tether cord must be
attached to operator clothing eyelet.
Lights Check for proper operation.
________
SAFETY INFORMATION
________
13