P TG 5610 B/D Reference Manual. Rev 1.0
Page 42 of 53
Audio Tab
This tab is for the configuration of the 8 channel audio generator. The 8 channels are
arranged into 4 x AES groupings – each with CH1 (left) and CH2 (right) channel.
Wavelength (bit depth)
– this checkbox is provided to switch each individual AES
grouping into 20 or 24 bit modes of operation.
Frequency Set
– Using this adjustment it’s possible to set the channel frequency to
anything between 20Hz and 20KHz in 1 Hz steps. (Default 1 KHz) The value can be
typed in with the keyboard or adjusted with the up and down buttons.
Phase Set
- Using this adjustment it’s possible to set the channel phase to anything
between 0º and 360º in 1º steps. (Default 0º) The value can be typed in with the keyboard
or adjusted with the up and down buttons.
Pause
– Using this checkbox it’s possible to insert a momentary pause into the test
frequency. Sometimes used to identify left and right channels.
FS level set
– The sliders provided allows the setting of the audio output Full Scale
(FS) level for each channel. Set between 0dB FS and -60dBFS (default is -9dBFS). The
button below the slider is for resetting to default (-9dBFS).
Note: This audio is available on the external AES audio outputs as well as being
available for embedding into both SDI streams.
