P TG 5610 B/D Reference Manual. Rev 1.0
Page 40 of 53
Text Overlay
– This part of the GUI is concerned with setting up the character
generator.
Insert Text
-The checkbox turns the character generator ON or OFF (without changing
the text and formatting information if any has been specified)
P TG 5610 supports 22 characters total, across multiple lines. (Spaces and carriage
returns count as once character) Test is entered into the box provided using the
keyboard. The number of characters used and remaining which are available is shown.
Test entry will stop when the limit of 22 characters is reached.
Foreground Color
- This sets the text color, make selection from the drop down list
provided. (Transparent is provided as a selection if required)
Background Color
- This sets the background “box” (P TG 5610 will insert and auto
sized box to background the text when selected), make selection from the drop down list
provided. (Transparent is provided as a selection if required)
Text X and Y Position
– Adjusting these values will allow positioning of the text
(and text box) anywhere on the video output. This is best done while viewing the output
video signal.
Audio Embedding
– This is where the embedders are configured. Simply select the
checkbox required to embed audio in the required Audio group(s)
Although the audio embedder is shown separately on each SDI output tab it is a global
setting. It is not possible to switch off embedding on one SDI channel and select it on the
other.
Note. P TG 5610 has an 8 channel audio test generator, which is enough for two
groups of AES audio. The 8 channel audio is simply duplicated into groups 3 and
4 if selected.
8 Channels from Audio
Generator
8 Channels from Audio Generator
(duplicated)
