LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com [email protected]
GR-18S
for example, write 192.168.1.101 and click “
Change Device IP
” button.
The OCS software will send the new IP to the cabinet and it will scan the network again showing the same in-
formation as before, plus more information such as Pc name, IP address and Port in which the communication
is established.
When we have a lot of cabinets connected in the network we can use the button
“Identify Device”
to see which
box is selected (two activity LEDS will blink for one second). With that information then we can
“Change device
NAME”
assigned to this Cabinet by clicking in the
“Change Device Name”
button after writing in the box above
the desired Name.
Returning to the main screen, we can see each cabinet showing: RMS levels, Input clip, power module tempera-
ture, compression levels, air absorption compensation and cabinet angulation, as well as displaying the cabinet
model and IP address.
15
