LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com [email protected]
GR-18S
Select “Internet Protocol (TCP / IP)” and click on pro-
perties.
13
Select: “Use next IP Address” And write as you wish, in
order to con gure your network.
Normally, Ip values will be something like this:
IP Address: 192.168.1.xxx
Subnet Mask: 255.255.255.0
Where xxx will be a number between 1 and 254
Accept to quit the network settings and again to apply
them at the next screen. Depending on the Windows
Version, you will be asked to reboot or not.
Once the Computer is con gured with a static IP proceed
to connect to the line array system through the O.C.S.
(online control system) software.
Open the OCS Software and from the Initial Screen
choose
Ethernet Device
into the Con guration menu.
It will open a different screen, as follows, there you can see your Network con guration, and the cabinets cur-
rently connected.
