background image

                              

 

 

 

 

 

 

LS-AES 

 

Page 2 

Introduction 

Thank you for purchasing the LS-AES™!  We are proud to provide you with a reliable, professional 
quality product for your digital audio requirements.  
 
This manual provides basic information to help you get started. Additional information is available 
via our web site and email support. Please refer to the support section at the end of this manual for 
support contact information. 
 
The LS-AES is an 8-channel AES/EBU or S/PDIF LStream

 interface module that is designed for 

use with the LynxTWO and L22 professional audio interfaces. The device communicates via Lynx’s 
proprietary LStream  multi-channel interface. 

 

The internal header LStream port on the LynxTWO/L22 provides support for connecting two LS-
AES internal cards. In this case, the number of AES or S/PDIF channels is doubled. 

 

Before You Begin 

We recommend that you read through the manual to acquire an overview of the installation procedure 
and use of the LS-AES. You should have a working knowledge of Windows and general PC 
concepts. Additionally, refer to the User’s Guide included with your LynxTWO or L22. 
 

Contents 

Verify that you received the following in the LS-AES shipping carton: 

• 

LS-AES card in cushioned antistatic bag 

• 

LS-AES digital I/O cable (six- foot cable with eight XLR connectors) 

• 

LS-AES LStream cable (gray ribbon cable with three IDC connectors)  

• 

Warranty Registration Card 

 
Optional Equipment 

The following equipment may be required depending on the configuration of your system and the 
type of devices the LS-AES is connected to: 

• 

Lynx P/N CBL-XFDRM18: female S/PDIF adapter cable for digital outputs 

• 

Lynx P/N CBL-XMDRM18: male S/PDIF adapter cable for digital inputs 

 

System Requirements

 

Verify that your computer meets or exceeds the following the system requirements specified in the 
LynxTWO or L22 User’s Guide.  
 
The LS-AES requires one expansion card position in your computer. A PCI slot 

is not required.

 The 

LS-AES derives all signals from the host LynxTWO/L22 card via the LStream ribbon cable. 
 

Содержание LS-AES




















Отзывы: