Lynx LN15ICE Скачать руководство пользователя страница 6

NOTE

Figure 6

Electrical Connection

Model

Minimum 

Height

Maximum 

Height

LN15ICE

33 3⁄4"

(85.7 cm)

34 3⁄4"

(88.3 cm)

Electrical Shock Hazard

• Do not use an extension cord with this appliance.

They can be hazardous and can degrade product

performance.

• This appliance should not, under any circumstanc-

es, be installed to an un-grounded electrical supply.

• Do not remove the grounding prong from the power

cord. (See Figure 4.)

• Do not use an adapter. (See Figure 5).

• Do not splash or spray water from a hose on the

appliance. Doing so may cause an electrical shock,

which may result in severe injury or death.

!

WARNING

A grounded 115 volt, 15 amp dedicated circuit is required.

This product is factory equipped with a power supply 

cord that has a three-pronged, grounded plug. It must be 

plugged into a mating grounding type receptacle in accor-

dance with the National Electrical Code and applicable lo-

cal codes and ordinances (see Figure 6). If the circuit does 

not have a grounding type receptacle, it is the responsibility 

and obligation of the customer to provide the proper power 

supply. The third ground prong should not, under any cir-

cumstances, be cut or removed. 

Ground Fault Circuit Interrupters (GFCI) are prone to nui-

sance tripping which will cause the appliance to shut down. 

GFCI’s are generally not used on circuits with power equip-

ment that must run unattended for long periods of time, un-

less required to meet local building codes and ordinances.

INSTALLING YOUR APPLIANCE

Figure 4

Figure 5

Do not remove

ground prong

6

Содержание LN15ICE





























Отзывы: