manualshive.com logo in svg

Lynx LN15ICE, Руководство по эксплуатации и установке, Страница: 17 / 28

Поделиться
Скачать
Lynx LN15ICE Скачать руководство пользователя страница 17

!

CAUTION

CLEANING YOUR ICE MACHINE

Forcing ice through the grid cutter will break the grid cutter 

wires.

!

CAUTION

Remove all ice 

from the evaporator 

plate and grid cutter 

area that is not 

embedded in wires

Figure 26

Figure 27

Clean mode:

To ensure maximum performance and ice quality, it is 

recommended to clean your ice machine once every six 

months. This simple cleaning routine will also ensure water 

and energy use continues at optimum efficiency.

Clean reminder: 

A "CLEAN" reminder will occur every 6 months 

to remind you that it may be time to clean your 

appliance. Over time mineral build up on the cold 

evaporator plate can occur which can adversely 

affect the quality of your ice. This build-up is 

dependent on your water source and usage. Normal 

ice production will continue while the "CLEAN" reminder 

is displayed. You may clear the "CLEAN" reminder at any 

time by momentarily pressing the "ON/OFF" icon. When 

reset, the "CLEAN" reminder will reset and not occur for 

another 6 months. If you choose to clean the appliance at 

this time, see the options menu section below.

CLEAN

NOTE

Homes with poor water quality or high clear ice usage 

might require more frequent cleaning.

To clean your ice machine you will need to purchase a 

"nickel safe" ice maker cleaner

 (#36684)

. Cleaner can be 

obtained by contacting Lynx Grills Customer Service at 

888.289.5969.

Once you have your cleaner: 

Turn the ice machine off by pressing and holding 

the "ON/OFF" icon for 3 seconds. "OFF" will be 

displayed on the control. 

OFF

 

Remove all ice from the ice bin (see Figure 26). 

Drain the water from the water reservoir by removing the 

black plug from the bottom of the fresh water reservoir (see 

Figure 26). After the water is drained, replace the plug in 

the bottom of the reservoir.

Allow all of the ice to fall from the evaporator plate 

and remove any ice from the grid cutter. If there is ice 

embedded in the grid cutter wires, wait for it to melt and 

fall out. 

Do not try to remove ice that is embedded in 

the grid cutter wires as that may break the wires.

 (See 

Figures 19 and 20).

17

Содержание LN15ICE





























Отзывы:

Нет отзывов