
Page 5
Lynx Grills Inc.
L24REF
INSTALLATION INSTRUCTIONS
CHOOSING THE RIGHT PLACE
Place the appliance in a dry and regularly ventilated place. Never place the appliance near heat emitting
devices (e.g. cooker, radiator, water heater or similar devices).
RECOMMENDED GROUNDING METHOD
A 115 Volt, 60 Hz. AC only 15- or 20- amp fused or circuit breaker protected, grounded electrical supply is
required. It is recommended that a separate circuit serving only your appliance be provided. Use outlets that
cannot be turned off by a switch or pull chain. Connect this appliance to a 3 prong power supply socket outlet
(which has a ground terminal). If you only have a two prong outlet have it replaced by a qualified technician
with an outlet that meets the local codes. Required nominal voltage and frequency are indicated on the rating
plate. The connection to the power supply and grounding has to be made according to current standards and
regulations. The appliance resists temporary voltage tolerance from -15 to 10%.
IMPORTANT
Electrical Shock Hazard. Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not
use a 2/3 adapter. Do not use an extension cord. Failure to follow these instructions can result in
death, fire, or electrical shock.
A GFCI (ground fault circuit interrupter) is built into every line cord. Do not defeat or bypass this important
safety feature. The line cord supplied with this appliance is specially designed for outdoor use. Use only a
factory supplied replacement cord with a GFCI (ground fault circuit interrupter) in the event the cord becomes
damaged.
ENERGY SAVING TIPS
The more airflow you can provide around an appliance, the less energy it will use.
Keep doors or drawers open a minimum of time, and shut securely.
LEVELING YOUR REFRIGERATOR
1. Locate the two front leveling legs mounted into the underside of the appliance.
2. Adjust the front legs just enough to lift the cabinet up off of the floor.
3. Place a leveling tool on top of the appliance first side to side, then front to back. Turn leg counterclockwise
to raise a corner. Turn leg clockwise to lower a corner.
4. Once you have achieved side to side level, increase the front to rear adjustment to be slightly higher at the
front. This will ensure the door closes automatically once it is released. Increase the front to rear
adjustment until the door self-closes.
5. After appliance is fully loaded, recheck with level as in Step 3
.
Содержание L24REF
