ADP-215
LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com [email protected]
Select "Internet Protocol (TCP / IP)" and click on
properties.
Select: “Use next IP Address” And write as you wish,
in order to configure your network.
Normally, Ip values will be something like this:
IP Address: 192.168.2.xxx
Subnet Mask: 255.255.255.0
Where xxx will be a number between 1 and 254
Accept to quit the network settings and again to apply
them at the next screen. Depending on the Windows
Version, you will be asked to reboot or not.
Once the Computer is configured with a static IP pro-
ceed to connect to the line array system through the
O.M.S. (online monitoring system) software.
Open the O.M.S Software and from the Initial Screen
choose ETHERNET.
It will open a different screen, as follows, there you can see your Network configuration, and the cabinets currently
connected.
13
