ADP-215
LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com [email protected]
CONFIGURING THE CABINET DSP OPTIONS
From the buttons below the display on the cabinet’s back panel you are able to configure the Basic adjustment
functions of the internal DSP. Depending on the model, you can find the following configurations:
Note:
You must apply the desired configuration in each one cabinet. This is done via the buttons located on the back panel
of the cabinet and requires electrical power to work.
FIR FILTERS
Finite Impuls
e
Response (FIR) filters are used in the signal processing of the ADP-215 cabinet. FIR is a type of
digital filter with linear phase characteristics. This frees system designers from the constraints of phase anomalies
associated with analogue filters or their digital versions (IIR, Infinite Impulse Response). When properly used, FIR
filtering can audibly improve a system’s impulse response and reduce crossover interference.
9
