139-0498-02.25
25
Chapter Five--Control Setup
Setup
SETUP HOME
Figure 5-1--Setup Home
This section will guide you through the process of setting up yur
RPC Controller. First enter the IP address or NetBios name into
your web browser. When the RPC screen pulls up. Select “Setup”
and “SetupHome” Tabs.
To set the username and password for your panel, click the
Setup tab. The Setup Home tab should be displayed. The
default username displayed is “admin” and the password
fi elds is “pw”. Enter the desired username in the fi rst fi eld,
password (without spaces or symbols) in the second and
then retype the password again in the third fi eld. When ready,
click the Update Login Info button to save the changes to
the controller’s memory. Note: Password can be any 2-8
character string.
Contact information for service can also be entered on this
page. Under the Serial Number fi eld, enter the name and
phone number of the installing contractor (Electrician) and
the system integrator (A/V Technician) for future reference.
Save this information by clicking the Update Information
button below the Clock Set portion of the window.
