Lyngdorf TDAI-2170 Скачать руководство пользователя страница 51

Страница: 51 / 60

Error: Signal clipping

Either the incoming signal has been classifi ed as too loud, resulting in clipping or distortion, or a loud

noise in the immediate environment has corrupted the measurement results. If a loud noise has in fact

occurred, such as the sound of a closing door, reduce noise levels inside and in the immediate vicinity

of the room and repeat the measurement. If no loud noise has occurred, reduce the volume of the signal

and repeat the measurement.

Error: Too much noise

Either the incoming signal has been classifi ed as too loud, resulting in clipping or distortion, or a loud

noise in the immediate environment has corrupted the measurement results. If a loud noise has in fact

occurred, such as the sound of a closing door, reduce noise levels inside and in the immediate vicinity

of the room and repeat the measurement. If no loud noise has occurred, reduce the volume of the signal

and repeat the measurement.

Содержание TDAI-2170





























































Результаты поиска

Содержание TDAI-2170

Отзывы:

Бренды по названию

Популярные бренды

Lyngdorf TDAI-2170, Руководство пользователя

Результаты поиска

Содержание TDAI-2170

Отзывы:

Бренды по названию

Популярные бренды