Lyngdorf TDAI-2170, Руководство пользователя

Страница: 37 / 60

37
5.5 Second Speaker Setup
Here you have the option to store a second speaker setup. This will allow you to test another setup or to
have calibrated setups with and without a subwoofer, etc.
Enabling this will start the Guided Speaker Setup. When complete, the menu item Speaker Setup will be
available in the main menu, allowing you to switch between the two setups.
5.6 Outputs
The menus in outputs are where you will manually set up delays and crossover fi lters for your speaker
system. If the guided speaker setup has been completed the pre-made settings will be shown, these
can be optimized as well.
When building active speaker systems, it is recommended that you use the original crossover point(s)
used by the manufacturer. Due to the short wavelengths of the mid/high frequencies, it is essential that
crossover frequency, fi lter type, order, and delay are set correctly. Therefore, creating fi lters for speakers
is an iterative process that requires great knowledge and several critical listening sessions in order to
achieve seamless integration of the different speaker drivers.