LyngBox HDTV receiver, Руководство пользователя

Страница: 7 / 24

2.3 Start Using the LyngBox
This section gives you a very brief introduction on how to use the LyngBox to watch TV, after you have gone through the first
configuration.
When the LyngBox is first started it will display the first channel in the channel list with all free TV channels. The following
buttons on the remote control are used for basic navigation in TV mode and menus:
Next channel Display the menu
Previous channel Exit from the menu
Display the channel list; select the marked Exit to previous menu
channel or menu choice
Navigate in the channel list and menu
You will be requested to enter the following information.
a. Language selection
b. Country and city
c. Network settings
d. DiSEqC equipment
e. Dish size
f.
Direction of the parabolic dish(es)
g. Whether a terrestrial channel search shall be performed
Enter the requested information using the navigation buttons on the remote control. Select the “next” field and press to
move to next view.
6. The LyngBox will now do the following:
a. First contact the LyngSat Maps service to receive information on which satellites that can be reached with the
specified equipment.
b. Next contact LyngSat and download channel information for all available satellites.
c. Search for terrestrial channels. If no Internet connection is available, the LyngBox will also search for satellite channels.
d. Store all channels in the global channel list.
The initial set-up is now ready and you can start watching TV. To further enhance your experience you can configure the
LyngBox to use your TV in the best way. See section 7.2 for further help on output settings.
5.
13 12