LyngBox HDTV receiver, Руководство пользователя

Страница: 6 / 24

2.1.4 Connect Audio and Video
Connect the LyngBox to the TV-set using one of the following cables.
1. HDMI (marked “HDMI”)
2. Component video (color coded RCA connectors, marked “Component video out”)
3. SCART (marked “SCART”)
4. Composite (yellow RCA connector, marked “Video out”)
For audio output from the TV-set, no additional cables are needed when using HDMI or SCART. To get audio output when
using Component or Composite video cables you will need to connect extra audio cables to the TV-set. For guidance, see the
description for amplifiers below.
To use an external audio amplifier
one of the following cables needs to be connected between the LyngBox and the amplifier.
Optical digital audio cable (marked “Digital audio”)
Analogue stereo audio cable (red and white RCA connectors, marked “Audio out”)
2.2 First Startup
The following buttons are used during the first configuration of the LyngBox:
Set remote control in LyngBox mode
Power up the LyngBox
Navigate in the menu system
When everything is connected you are ready to start the LyngBox.
Insert batteries into the LyngBox remote control.
Start the TV-set.
Switch on the main power of the LyngBox. The LyngBox is now in stand-by mode.
Press the LyngBox button on the remote control to make sure it controls the LyngBox. Next, press the power button on
the remote control. The LyngBox logotype should be displayed on the front-panel display and the menus for LyngBox
first startup should be displayed on the TV. Note that starting for the first time can take a while.
If nothing can be seen on the TV after 2-3 minutes and everything is connected correctly, then your TV is probably not
compatible with the default video mode of the LyngBox. To cycle between video modes, first press and then press
down for at least one second. Repeat the procedure until you get an image on the TV.
1.
2.
1.
2.
3.
4.
x 3 x 2
1
3
2
4
1
2
fig. 3
11 10
Confirm a choice
Exit from a submenu
Enter digits, to move decimal point
See text cues in menus for usage
[red][green]
[yellow][blue]