background image

Introduction

Congratulations on your purchase of an Affinity™ product.

I want to personally welcome you to the Lydall larger family.  In October of 2001, Lydall
purchased Affinity Industries, in an effort to expand capability as a Total Thermal Solutions
Provider.  Affinity’s chillers and heat exchangers complement Lydall’s existing wide array of
Passive Thermal Solutions, augmenting Lydall’s engineered thermal solutions for use in
appliance, cryogenic, building products, and automotive markets.  Our group is market driven as
a formidable thermal solution manufacturer.  

Lydall, Inc. is a New York Stock Exchange listed company (NYSE: LDL) headquartered in
Manchester, CT.  Our company, with ten operations in the United States, France, one in
Germany, and Sales/Service Offices in Japan and Singapore, is recognized for working with
customers to satisfy their unique thermal solution needs, and for delivering high quality,
innovative products, and exceptional service.  

Affinity™ products are high-precision specialty temperature-controlled equipment.  The following
product manual is designed to help you realize the full value of your purchase.

We highly recommend that you read this manual in its entirety.  The manual will assist your
company with the installation, operation, and routine maintenance of your Affinity™ product. 
Please keep this manual readily accessible to operation and service personnel to ensure you
get the most out of our product.  

If you have any questions about this model, or have other thermal solution needs, do not
hesitate to call our Sales department (603-539-3600) or the 24/7 Service department (603-539-
5005).

Thank you for your confidence in our ability to meet and/or exceed your needs and
expectations.

Sincerely,

John Tattersall
Group Vice President
Lydall Industrial Thermal Solutions, Inc.  

O:\MANUALS\D3774  (01/11/2002)

Содержание Affinity



























Отзывы: