12
MIC.net head
Indicator
Switch
Holder
Battery
chamber
9V Battery
Battery cover
Close
Open
Handheld wireless MIC
7
In the backlight AUTO MODE, press BACKLIGHT ON/OFF BUTTON
one time to switch off the backlight. In the off situation of the backlight,
press USB/SD/ ON/OFFone time, the backlight change to AUTO, can
be switch to each other from AUTO to OFF.
16. Wireless MIC1
17. Wireless MIC2
18. TABLE & wired microphone
19. Volume control knob of MP3/AUX
20. Volume control knob of ECHO
21. MAIN volume control knob
22. Tone control knob
23.
*
6.35 Mic Input Jack
24. Aux Input
25. AUX Output
26. Mic Priority
27. Speaker output 1
28. Speaker output 2
29. DC Fuse
30. Charge
31. Power Switch
32. Socket of AC power
33. Power LED
34. Weak power indicator of built-in rechargeable battery
35. Charge LED
36. AC Fuse
37. Standby Fuse
Insert the plug of the wired microphone into the jack of the amplifier.
Adjust its volume control to the desirable position.
How to use the wired microphone?
1.Push upward the cover to insert or replace a 9V battery following the
correct polarity.
2.Plug the lavaliere mic into the input jack and turn "ON" the transmitter.
LED lights indicating normal function.
3.Adjust the main volume to a certain level. Then adjust the gain of the
transmitter to a level you require.
How to use the wireless Lavaliere MIC
In case of noises, voice interruption occur while in operation, indicating
the power of the battery is low, turn "OFF", remove the battery and replace
a new one following the correct polarity. To avoid battery leakage, do not
left the battery in the chamber when not in use.
Based on this one:
Note:
Lavaliere wireless MIC
Wireless transmitter
9V battery Chamber
Cover
Lavaliere MIC
MIC jack
Power switch
Power LED
Volume
Cover
1. USB or SD be recorded to each other:
In MP3 mode, press /SCAN
/FM/MP3 REC more than 2 seconds, then press
/FM DOWN and
/FM UP to select ONE/ FOL/ ALL then press /SCAN/FM/MP3
REC to confirm starting the RECORDING.
QUICK SET INSTRUCTIONS:
