13
6
7.2 In MP3 mode, Press and hold the MODE/DEL more than 2 seconds
into DELETE situation. At this time: Use the
/ DOWN & the
/ UP two buttons to select the file (ONE is single song, FOL is the
present folder, ALL is the complete folders) will be deleted and
press the MODE/DEL again to confirm DELETE.
7.3 In MP3 mode, press and hold the MODE/DEL more than 2 seconds,
but within 8 seconds no any operation, it will exit the present situation
automatically.
7.4 In MP3 mode, press and hold the MODE/DEL more than 2 seconds,
or press STOP/MEMO button to exit the present situation.
8.
/ MEMO :
8.1 In MP3 play mode, press this button to enter STOP situation;
8.2 In mode, press this button to have the below functions:
8.2.1 If the MOMERY has not saved the 1-20 radio stations, at this
time to press this button, then nothing will funciton.
9. FOLDER - / -10 BUTTON:
In MP3 mode, press this button to decrease
10 songs for play. When the present folder is less than 10 songs, it
will jump to the last song. Press this button more than 2 seconds,
decrease one folder at the present situation.
10. DOWN/
BUTTON:
In MP3 MODE, press this button to select the
previous fonward/backward. Press and hold this button to be fastly
forward.
11. REMOTE:
This is a remote sensor for the remote controller of the
MP3 and FM.
12. USB port:
This is a USB port for inserting the USB card.
13. SD port:
This is a SD port for inserting the SD card.
14. LCD display :
This is the LCD display screen for the funcitons of
the MP3 and FM and recording.
15. BACKLIGHT :
First time to press USB/SD/ON/OFF button to switch
on the MP3 default backlight AUTO MODE. Press any key except the
BACKLIGHT ON/OFF BUTTON, the backlight is in high light for 10
seconds. After 10 seconds if no any press to it,change to low light.
Please go through this manual carefully before operation, if you notice
any abnormality regarding the amplifier, contact the dealer for services
or you may have a simple check as follows:
1.Switch off the power of amplifier and transmitter and pull off the
AC power plug.
2.When using the microphone and feedback occur...
1)Adjust the amplifier volume.
2)Adjust the transmitter volume.
3)Move any direction or make a distance between the amplifier and MIC
until the feedback is gone.
3.If noises and voice interruption occur:
1)Battery of the wireless MIC is weak replace a new one.
2)AC power should be applied in case of weak power of the built-in DC
power when using built-in DC power in the amplifier.
3)A new MIC wire should be replaced when the MIC wire is wearing out.
4.No sound:
1)Check the volume of the amplifier and transmitter is well adjusted.
Cautions and trouble shooting
Aux output will go to the recording system and you can record while using
the amplifier system,or the sound sources will go to the machine connected.
How to use the Audio output?
1.Any kinds of Audio signal input (0dB 600
*
) can be connected, such
as CD, TUNER and REC cassette.
2.Adjust the volume control to the desirable position.
How to use the Audio input?
How to use the SPEAKER OUTPUT 1/2
Connect the external 4
*
loudspeaker to this speaker 1&2 Jack to meet
your requirement.
