Solutions of Failures and Problems
1. The power indicator does not light
Check the normality of power line connection.
2. No picture showed in the connected displayer
Please confirm that your external displayer has correctly connect the VGA display
interface or HDMI interface of the host.
3. The keyboard and mouse is not under control
Please insert USB2.0 of rear panel in prior to check whether the control line is
inserted well and whether the cable is connected in correct way.
4. The host is no response
Long-press on power button of the host for at least 5 seconds until it is shutdown (then
press the button again to restart the host)
5. After the sever connects to the network, you can’t see other devices through
the management software.
Please check server is connected to the router and whether other devices that need
to be connected are connected to the router too.
6. When the server goes to sleep, wake up partitions may occur after dropping .
System power is set to “never sleep” state, if there is a case of accidental dropping,
please restart the software .
In case of any problem, which cannot be solved through methods above, please
contact us for consultation.
LY International Electronics Co., Ltd
6
