* *
Home Central Audio HS-8250
17
"Zone” option and then press the digital wheel once, so that the icon
will appear behind
the pane. Then, rotate the digital wheel to select. After that, press the digital wheel once to
confirm and exit.
Volume Adjustment: For this operation, please refer to the description of Volume
Adjustment under zone control.
Program Selection: Select the audio source allocated this zone by using the method for
selecting the zone as above. The symbol “…” indicates default setting, and “OFF”
indicates that this zone will close the previous programs upon arrival of the timer point.
The zone 1 of this system is provided with 8 audio sources, and the other zones are
provided with 6 audio sources.
The audio sources “5.1Line and “Optical” in zone 1 are
not subject to timer control.
You may select one audio source at the same time for all
the zones, or select different audio sources. If the MP3 or tuner is playing the program
before arrival of the timer point, but there is no setting to MP3 or tuner at the timer point,
then the MP3 and TUNER will maintain the play state before.
Ringer Setting: This operation is used for setting the ON/OFF state of ringer at the timer
point. Rotate the digital wheel to move the cursor to the pane behind the “RINGER”. Then,
rotate the digital wheel to select. After that, press the digital wheel once to confirm the
selection and exit.
Default: If set to default, this zone will keep the state prior to arrival of timer point.
After setting, press “Confirm” once to confirm the above operations and exit the zone timer
setting interface. Then, return to the timer setting interface.
Note: One timer point can control all the zones. For example, after setting of zone 1 at a
time point, you may continue to repeat the above operations under this interface to
set the other zones without pressing “Confirm”.
6.1.10 Delete: What is deleted in this operation is a specific timer point at present.
6.1.11 Delete All Day: What is deleted in this operation is the timer point of the full day on a
specific date (e.g. Wednesday) currently displayed.
6.2 Time Calibration
Under “Operation Option” interface, rotate the digital wheel to move the cursor to “Time
Calibration” option. Then, press the digital wheel to enter the time calibration interface (Fig. 6-2).
Rotate the digital wheel to move the cursor to the desired time number. When the letters become
white, press the digital wheel again until the icon
appears
behind. Rotate the digital wheel to change the number. After
that, press the digital wheel to confirm the selection and exit.
Complete the other settings by using the same method.
After completion, move the cursor to “Confirm" option and
press the digital wheel once to confirm the current operation and exit the time calibration interface.
Or, you may move the cursor to “Cancel” option and press the digital wheel to cancel the current
operation and exit the time calibration interface.
6.3 Infrared Learning
10
MON.
CANCEL
ADJ TIME
year
03
0 9
mo.
day
OK
0 6
：
1 0
0 9
：
（
Fig. 6-2
）
