* *
Home Central Audio HS-8250
13
have selected the third director in USB disk. The number in the rear pane represents the serial
number of the music in this directory. The name of the selected music is displayed behind the pane.
When selecting the music, please watch the notes on the lower of the screen. If the screen
displays “No USB disk. Please insert USB Disk", this indicates that there is no USB disk inserted
into USB port, or you have inserted an USB disk that cannot be recognized by the equipment. If
you have inserted an USB disk and the equipment has accessed it, the note “USB disk inserted.
Please wait…” will appear on the lower of the screen. If there is no music under a directory in USB
disk, the note “No music found under this directory. Please select another directory" will appear if
this directory is selected. After that, the equipment automatically turn to another directory and
display the names of the music on that directory.
For manual control of MP3 player, you may use the “
“ and “
“ key on the equipment panel
to select the music, and use the “
“ key to control the play and pause. You may also control by
using the wired remote controller and infrared remote controller. For detailed operating methods,
please refer to the introduction of key functions in the Operating Instructions.
5
．
Instructions for Manual Operation of Tuner
Press the “TUNER” key on the panel to enter the tuner control interface (Fig. 5-1). From this
interface, you can control the tuner band, radio frequency and channel. In zone 1, the tuner
effect is best set to STEREO mode from the "Listening Mode” of “Hall Sound Field Mode Setting".
5.1 Band Selection
From the panel, you may press the BAND key under the screen to switch between AM and FM.
You may use the band switching key on the wired remote controller and infrared remote controller
to switch between AM and FM. The frequency range of AM band is 522kHz-1620kHz; and the
frequency range of FM band is 87.00MHz-108.00MHz.
5.2 Search Radio
From the panel, you may press the “
“ and "
“ key under the screen to search the
radio storage number forward or backward and load the saved radio. You may also search the
radio by rotating the digital wheel. Rotate the digital wheel clockwise to search toward the high
band, with slow rotation of the digital wheel for one grid to increase the frequency by one step
(One step is 50kHz for FM band and 9kHz for AM band). When searching the radio station, the
black message indication bar as shown in Fig. 5-1 will be displayed behind "Signal” option. The
indication bar will be become wider if the signal is strong, and will become narrow if the signal is
weak. Quick rotation of the digital wheel for one turn can enter the auto search state. It will be
stopped when searching the radio frequency or reaching the highest band. Rotate the digital wheel
counterclockwise to search toward the low band, with slow rotation of the digital wheel for one grid
to decrease the frequency by one step (One step is 50kHz for FM band and 9kHz for AM band).
The signal display and auto search are same as above. You may also use the key
LOOP
MP3 PLAYER
03
\
0 1
star
PLAY ALL
00
：
58 04
：
27
BAND FM
100.45
MHz
SIGN
STEREO
AM/FM PLAYER
CH 40
（
Fig. 4-1
）
（
Fig. 5-1
）
