30
2.9 System ballot
2.9.1 Sign in
The microphone LCD will display “PLZ INSERT IC CARD” or “PRESS SIGN IN KEY” when
conference operator starts sign in. Delegates can sign in by IC card or by sign in key
press; microphone LCD will display “SIGN IN SUCESS” if delegates sign in correct.
Then the microphone can achieve the ballot function.
2.9.2
Vote
There are three buttons on the microphone unit for voting: yes/abstain/no. After
voting starts, delegate can press the corresponding button according to their decision.
The delegate can re-vote before the voting finishing if they want to revise their vote;
the voting results are subject to last key-press. The voting results will display in the
software and sub-screen.
* Operator can set in software voting results by first key press/last key press.
2.9.3
Elect
There are five buttons on the microphone unit for electing: Candidate 1/2/3/4/5.
After election starts, delegate can press the corresponding button according to their
decision. The delegate can re-elect before the election finishing if they want to change
their elect; the election results are subject to last key-press. Electing results will
display in the in the software and sub-screen.
* Operator can set in software electing results by first key press/last key press.
2.9.4 Scoring
When conference start scoring, five button on the vote unit means: “--” (0), “-“(25),
“0” (50), “+” (75), “++” (100).
2.9.5 Software
If user need to control the conference discuss, video and ballot, etc. Please use
infrared conference software to achieve these functions, please read the software user
manual.
