LY International Electronics H-08EX, Руководство пользователя

Страница: 8 / 18

8
1. Mono headset output (3,5 mm stereo jack)
When using the included mono headset, plug it into this output
2. REC output jack. 3.5mm jack, lavalier MIC jack of prisident unit
3. Vol knob
When using the knob, you can decrease or increase speaker monitor volume
4. Speaker Monitor
5. Candidate 1/Yes/LCD co
6. Candidate 2/No/LCD contrast -
7. MIC ON/OFF
Press this button to speak (the station will be immediately enabled unless the limit of
simultaneously enabled stations has been reached), Press again to turn off microphone
8. PRIORITY
Press this button on the PRESIDENT station to disable all other speaker stations
9. --/Candidate 5/start vote( on chairman unit)
10. Sign-in IC card insert interface
11. 8-pin connection port
Connect the included cable to this port according to the following patterns
12. Microphone LCD display
13. Attend/Vote indicator
14. Candidate 3/ Abstain button
15. -/Candidate 4 /language select/LCD contrast/Reset( on chairman unit)
16. Power indicator
17. Indicator light on active microphone
When microphone is active, indicator light switches on
18. Microphone capsule
6. CONNECTION
Connect the unit to 230 V AC 50/60 Hz mains . Use the connection cables provided to connect the daisy-
chained stations to the 4
BASE INPUT s (figure 2, ref. 23) as shown in figure 5 , paying attention not to
connect more than 30 stations to each line and no more than 64 stations altogether.
Closed-loop lines can be created with the optional 3 m cable, as shown in
figure 6 . In this way no station
will be isolated in case of interruption one of the lines. The configuration shown in figure 6 cannot allow more
than 30 stations on each loop.
In any case, the maximum limit of 64 stations cannot be exceeded.
The system can host more than one PRESIDENT station. They can be inserted at any position on the chain.
If the system should support video camera track the conference management function, please connect the
system as per
figure 7.