V7 Version 1.96
Januar 2012
Page 16 of 39
Navigate
In this menu navigation settings can be configured.
If
Navigate to home
is enabled, LXNAV V7 will navigate back to the takeoff point. This
position has been stored in memory just before takeoff but only if GPS OK status is showing.
Navigate to home will not work if “
use GPS data
” is not checked.
Use GPS data
, enables the V 7 to receive GPS data on GPS port. If
Use GPS data
is
disabled manual navigation will be active, in that case GPS icon on main screen will not be
displayed. It means that pilot must manually enter distance and wind component (See
Chapter 5.2). If GPS is transmitting RMB sentences, LXNAV V7 will automatically calculate
final glide to that point. On picture below LXNAV V7 navigates to waypoint “Line 11”.
Be sure that you set correct target elevation. If target elevation is not set, LXNAV
V7, will not show
Arrival altitude
, but
Required altitude
. Required altitude is
the altitude that will be lost for the required distance.
GPS data will be receved only if baudrate on GPS side is set at the same value as
set on LXNAV V7 in Comm. Menu. (See Chapter 5.3.7 )
Target elevation
set to elevation of your departure. It can be adjusted any time.
Содержание V7
Страница 2: ......
