FlarmView Version 2.38
July 2017
Page 10 of 25
4.4.3
Selection Control
Selection boxes, also known as combo boxes, are used to select a value from a list of
predefined values. Use the up/down buttons to select the appropriate value.
4.4.4
Checkbox and Checkbox List
A checkbox enables or disables a particular parameter. Press
EDIT
button to toggle the
value. If an option is enabled a check mark will be shown, otherwise an empty rectangle will
be displayed.
4.4.5
Slider selector
Some values like volume and brightness are displayed as a slider
With
Edit
you can activate slider control, then
up/down
buttons you can select the
preferred value and confirm it with the
Ok
push button.
4.5
Operating Modes
LXNAV FlarmView has four operating pages. Main radar screen with different zoom levels,
Flarm traffic list and Setting Page. The fourth page (
Flarm watch
) is displayed
automatically if Flarm detects a potential collision situation and issues a warning.
