LXE VX6, Справочное руководство

Страница: 54 / 168

42 PCMCIA, CF and SD Slots
VX6 Reference Guide E-EQ-VX6RG-A
3. Before completely inserting the 2.4GHz Radio, connect the Antenna Cable to the 2.4GHz
Radio, using the port(s) indicated below:
Note: Radio cards for single antenna units may have the unused antenna port covered
with tape.
Cisco Radio Card
Hold the radio card with the Cisco logo label facing up. Connect the antenna cable(s) as
follows:
•
Cisco radio with single antenna – Connect antenna cable to right port, as shown
below.
•
Cisco radio with dual antennas – Connect antenna cables to both ports.
C
ISC
O
S
YST
EM
S
C
ISC
O
A
IR
O
N
ET
3
50
WI
R
E
LE
S
S
LA
N
A
DA
P
T
E
R
SE
R
IES
Right Port Left Port
Figure 2-30 Cisco Antenna Cable Connections
Symbol 11Mb Radio Card
Hold the radio card with the Symbol logo label facing up. Connect the antenna cable(s) as
follows:
•
Symbol 11Mb radio with single antenna – Connect antenna cable to Port A (left
port), as shown below.
•
Symbol 11Mb radio with dual antennas – Connect antenna cables to both ports.
S
pect
rum
24
®
Port B Port A
IE
E
E
802.
11
b
High Rat
e 1
1 M
bps
Wireless LA
N
A
dapt
er
Figure 2-31 Symbol 11Mb Antenna Cable Connections
4. Now complete the insertion of the 2.4GHz Type II PCMCIA Radio into the slot.
Note: When this process is complete, reattach the access cover screws using a torque
wrench capable of measuring to 9±1 inch pounds (1.016±.11 N/m). The screws
must be fastened to 9 inch pounds each. The screws require a Phillips size 1
driver head.
5. Re-connect the power cord/cable and turn the VX6 on.