Options
Option
Default
Information
Report failure to reconnect Enabled
The default time delay is 30 minutes. This value cannot be changed by the user.
There may be an audio or visual signal when a connection between a paired, active
device fails to re-connect. A visual signal may be a dialog box placed on the display
notifying the user the connection between one (or all) of the previously paired
Bluetooth devices has failed. This option is enabled by default.
Tap the X button or ok button to close the dialog box.
Possible reasons for failure to reconnect: Timeout expired without reconnecting;
attempted to pair with a device that is currently paired with another device;
attempted to pair with a known device that moved out of range or was turned off;
attempted to pair with a known device but the reason why reconnect failed is
unknown.
Computer is connectable
Enabled
Disable this option to inhibit MX8WM connection with all Bluetooth devices. This
option is enabled by default.
Computer is discoverable
Disabled
Enable this option to ensure other devices can discover the MX8WM. This option is
disabled by default.
When this option is enabled the Windows Mobile Wireless Manager displays
Bluetooth status as “Visible”.
Prompt if devices request
to pair
Disabled
A dialog box appears on the MX8WM screen notifying the user a Bluetooth device
requests to pair with the MX8WM. This option is disabled by default.
The requesting Bluetooth device does not need to have been Discovered by the
MX8WM before the pairing request is received.
Tap the Accept button or the Decline button to remove the dialog box from the
screen.
Note: In some cases, if a Bluetooth device is already paired this setting
cannot be changed. If this is the case, an error message is displayed and the
option is not changed. The Bluetooth device must be disconnected before
changing this setting.
Continuous Search
Disabled
When enabled, the Bluetooth connection never stops searching for a device it has
paired with when the connection is broken (such as the paired device entering
Suspend mode, going out of range or being turned off). When disabled, after being
enabled, the MX8WM stops searching after 30 minutes. This option draws power
from the Main Battery.
Computer Friendly Name
Empty
The name, or identifier, entered in this space by the System Administrator is used
exclusively by Bluetooth devices and during Bluetooth communication.
Note: The Device Name listed in
Start | Settings | System | About | Device ID
is not used during Bluetooth operation.
Note: Owner Identification name listed in
Start | Settings | Personal | Owner | Information
is not used during Bluetooth
operation.
E-EQ-MX8WMRG-C [ 81 ] MX8WM Reference Guide