manualshive.com logo in svg

LXE MX3-CE, Справочное руководство, Страница: 98 / 166

Поделиться
Скачать
LXE MX3-CE Скачать руководство пользователя страница 98

86 

Backup MX3-CE Files 

MX3-CE Reference Guide 

 

E-EQ-MX3CERG-E 

Backup MX3-CE Files 

Use the following to backup data files from the MX3-CE to a desktop or laptop PC using the 
appropriate cables and Microsoft's ActiveSync (NOT included in LXE file load). 

Prerequisites 

Serial Port Transfer 

• 

A desktop or laptop PC with an available serial port and an MX3-CE with a serial port. 
The desktop or laptop PC must be running Windows 95, 98, NT or 2000. 

• 

Null modem cable with all control lines connected. LXE recommends using the null 
modem cable part number listed in Chapter 1 "Introduction", subsection "Accessories". 

Infrared Port Transfer 

• 

A desktop or laptop PC with an infrared port and an MX3-CE with an infrared port. The 
desktop or laptop PC must be running Windows 95 SR2, 98 or 2000. 

USB Transfer 

• 

A desktop or laptop PC with an available USB port and an MX3-CE with a USB port. 
The desktop or laptop PC must be running Windows 98 SR2 or Windows 2000. 

• 

LXE-specific USB cable as listed in Chapter 1 “Introduction”, subsection “Accessories”. 

Configure the MX3-CE 

The following instructions relate to initial setup of ActiveSync. When there is a Connect icon on 
the MX3-CE desktop, this section can be bypassed. 

Serial Connection 

Select 

Start | Control Panel | Communications | PC Connection

. Click the Change button. 

From the popup list, choose  

 

Serial 1 @ 115200 

Note: 

The default is 57600 baud. 

This will set up the MX3-CE to use COM 1. If the MX3-CE has a dual-serial port endcap, the 
Serial 3 @ 115200 can also be selected. Click OK and ensure the check box for "Allow 
connection with desktop computer when device is attached" is checked.  

Click OK to return to the Control Panel. 

Select Scanner and ensure the integrated scanner is set to a port that is NOT the same as the 
ActiveSync port. 

Содержание MX3-CE







































































































































































Отзывы:

Нет отзывов