Caring for MX1-IS Battery Packs
WARNING
Failure to observe these warnings could result in injury or damage to the battery from rapid
discharge of energy or overheating of the battery:
Do not dispose of batteries into a fire. Burning will generate hazardous vapors and may cause the battery to explode.
Failure to observe this warning may result in injury from inhalation of vapors or burns from flying debris.
Do not immerse batteries in water or any other liquid. If batteries have been immersed, contact LXE before
attempting to insert batteries in the MX1-IS computer.
Do not disassemble or perform modifications to the battery. There are no user serviceable components in the
battery.
Do not place battery into a pants/shirt pocket or toolbox containing conductive objects (coins, keys, tools, etc.).
A battery placed on damp ground or grass could be electrically shorted. Lay the battery on its side when not in use.
Do not store batteries above 140°F (60°C) for extended periods.
Electrical Shock Hazards
DANGER
The following precautions should be observed to avoid the risk of electrical shock hazards
associated with charging batteries:
The MX1-IS MULTI-charger is designed for indoor use only. Do not operate outdoors or in extreme high humidity
environments. Do not expose charger to rain, snow or wet conditions.
Unplug the charger from the power source before cleaning. Use only mild detergent with a slightly damp cloth to
clean the outside of the charger. Do not use solvents or flammable cleaners. Allow the case to dry fully before
using it again.
Using attachments or accessories not recommended by LXE could result in fire, electric shock or injury.
This appliance must be properly grounded. If it should malfunction or break down, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with an external
power supply having an equipment grounding conductor and ground outlet that is properly installed and grounded
in accordance with all local codes and ordinances. Do not operate the charger with a damaged external power
supply or plug. LXE does not recommend the use of any extension cord with the MX1-IS MULTI-charger.
The MX1-IS MULTI-charger has been designed for use on a nominal 100 or 120 volt or nominal 220 or 240 volt
circuit and has a grounding attachment plug. The plug is an IEC configuration that is appropriate for your country
and regulations. Make sure that the appliance is connected to an outlet having a configuration similar to the plug.
No adapter should be used with this appliance. Improper connection of the equipment-grounding conductor can
result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided with the appliance. If it will not fit in the outlet, have a proper outlet
installed by a qualified electrician.
Do not disassemble the MX1-IS MULTI-charger. It contains no user serviceable parts.
Please refer to the Appendix to view the “Important Safety Warnings” translated
into the following languages:
DE – German
FI – Finnish
IT – Italian
PT – Portuguese
DK – Danish
FR – French
NL – Dutch
SE – Swedish
ES – Spanish
GR – Greek
NO – Norwegian
TR - Turkish