LXE HX1, Руководство пользователя, Страница: 3 / 50

IMPORTANT SAFETY WARNINGS US
SAVE THESE INSTRUCTIONS
This document contains important safety and operating instructions for the LXE HX1 Multi-Charger. Please read
all instructions and cautionary markings on the charger/analyzer itself before putting the unit into service.
Safety Alert Symbols
This symbol is used to call your attention to instructions concerning your personal safety. Watch
for this symbol – it will alert you to important safety precautions that must be observed to avoid
death, personal injury or property damage. Follow the instructions after the warning symbol and be
alert to the possibility of personal injury or death.
These signal words provide users with information about the seriousness of the hazard involved:
DANGER WARNING CAUTION
Indicates imminent hazards
which, if not avoided, WILL
result in severe personal injury
or death.
Indicates potential hazards
which, if not avoided, COULD
result in severe personal injury
or death.
Indicates hazards or unsafe practices
which, if not avoided, COULD result in
minor or moderate personal injury or
property damage.
Safety Instructions
Setting up the HX1 Multi-Charger
Locate or orient the AC cord so that it will not be stepped on, tripped over or subjected to damage or stress.
Analyze or charge only LXE part no. HX1A377BATTERY Rechargeable Lithium Ion Battery Pack in this
charger/analyzer. Other batteries or battery packs may burst causing injury or property damage.
Operating the HX1 Multi-Charger
Only users who have read and understand all operating instructions are qualified to operate the HX1 Multi-Charger.
Failure to read, understand and follow safety instructions may result in injury or death.
Keep the rear of the charger/analyzer free of obstacles and do not block the rear ventilation slots. The
charger/analyzer generates internal heat during charging.
Keep the charger/analyzer away from any heat source. Excessive internal heating can ruin the charger/analyzer.
Use care when inserting battery. Do not "slam" or slide the battery into the pocket, this could damage the
charger/analyzer.
Keep dirt and foreign objects out of the battery pocket. Do not short circuit any of the contacts in the battery
pocket, this could result in injury or property damage.
Do not operate the charger/analyzer if it has been dropped or damaged in any way. Return the charger/analyzer to
LXE.
Storing the HX1 Multi-Charger
Disconnect charger/analyzer by pulling the plug; not the cord.
Maintaining the HX1 Multi-Charger
Service should be performed by trained persons only. Return the charger/analyzer to LXE.
Caring for Batteries
Do not dispose of batteries into a fire. Burning will generate hazardous vapors and may cause the battery to
explode. Failure to observe this warning may result in injury from inhalation of vapors or burns from flying debris.
Do not immerse batteries in water or any other liquid. If batteries are immersed, contact LXE.
Do not disassemble or perform modifications to the battery. There are no user serviceable components in the
battery.
Do not place battery into pocket or toolbox with conductive objects (coins, keys, tools, etc.).